2000 mirage 1.8 tranny rebuild kit

[thekid]

So I'm leaking gear oil from the input shaft seal and It jumps out of 4th gear. I found the seal on rockauto but u can't seam to find the rebuilt kit or a syncronizer set can anybody point me in the direction on how to get my car back on the road

[mirage1]

http://transpartsonline.com/tpfile/tpca ... Type=F4A41" onclick="window.open(this.href);return false;

http://www.makcotransmissionparts.com/F4A41.html" onclick="window.open(this.href);return false;

Double-check the transmission model. But it should be a F4A42.

[thekid]

Thanks but afte look at the site I think thoses parts are for the automatic I'm looking for the manual rebuilt kit sorry if I wasn't clear in the beginning

[mirage1]

Oh crap! Sorry about that. I was just reading another post about automatic transmissions.

Give these a try, they are for F5M33, verify your transmission:

http://www.americanpowertrainwarehouse. ... er-mirage/" onclick="window.open(this.href);return false;

http://www.americanpowertrainwarehouse. ... er-mirage/" onclick="window.open(this.href);return false;

http://cobratransmission.com/index.php? ... ath=2_1830" onclick="window.open(this.href);return false;

[thekid]

Ok after procrastinating I finally drop the transmission in my car. One of the screws for the syncros where loose so I think I'm good on that end. However the input shaft deal is turn up n the shaft itself is shaking. I have already began the process of taking the tranny apart but I can't get it open. All the screws are out n from the manual I down loaded the bel housing is suppose to just separate with the internals attach. Am u doin something did I miss a step looking some help I really need to get my car back up